Big End Bearings for FORD MONDEO I (GBP) 1.6 i 16V:

Component Number: 4135RA ;
Standard Size [STD]: ;
ArticleState: Normal

Material: Aluminium ;
Material: Steel ;
Oversize [mm]: 1 mm ;
Supplementary Article/Info 2: Aluminium alloy on steel base ;
Quantity: 4 ;
Quantity Unit: Kit ;
for housing diameter [mm]: 49.91 mm ;
for wall thickness [mm]: 1.475 mm ;
Width [mm]: 20.45 mm ;
Supplementary Article/Info 2: with steel back ;
Supplementary Article/Info 2: with aluminium alloy layer ;
Supplementary Article/Info 2: with aluminium compound layer ;
ArticleState: Normal

Material: Aluminium ;
Material: Steel ;
Supplementary Article/Info 2: Aluminium alloy on steel base ;
Quantity: 4 ;
Quantity Unit: Kit ;
for housing diameter [mm]: 49.91 mm ;
for wall thickness [mm]: 1.475 mm ;
Width [mm]: 20.45 mm ;
Supplementary Article/Info 2: with steel back ;
Supplementary Article/Info 2: with aluminium alloy layer ;
Supplementary Article/Info 2: with aluminium compound layer ;
ArticleState: Normal

TecDoc Engine Number: FORD L1J ;
Version: CR4150SI0.5 ;
Undersize [mm]: 0.5 mm ;
ArticleState: Normal ;
General Information: Material: bimetal (aluminum silicon base)

TecDoc Engine Number: FORD L1J ;
Version: CR4150SI0.75 ;
Undersize [mm]: 0.75 mm ;
ArticleState: Normal ;
General Information: Material: bimetal (aluminum silicon base)

TecDoc Engine Number: FORD L1J ;
Version: CR4150SI1.0 ;
Undersize [mm]: 1 mm ;
ArticleState: Normal ;
General Information: Material: bimetal (aluminum silicon base)

Oversize [mm]: 0.25 mm ;
Component Number: 014PL20661025 ;
for bearing clearance from [mm]: 0.03 mm ;
to bearing clearance [mm]: 0.086 mm ;
for housing diameter from [mm]: 49.89 mm ;
to housing diameter [mm]: 49.91 mm ;
Width from [mm]: 19.85 mm ;
Width to [mm]: 20.1 mm ;
for wall thickness from [mm]: 1.592 mm ;
to wall thickness [mm]: 1.725 mm ;
for shaft diamater from [mm]: 46.89 mm ;
to shaft diameter [mm]: 46.91 mm ;
ArticleState: Article to be discontinued

for wall thickness from [mm]: 1.592 mm ;
to wall thickness [mm]: 1.725 mm ;
for shaft diamater from [mm]: 46.89 mm ;
to shaft diameter [mm]: 46.91 mm ;
for housing diameter from [mm]: 49.89 mm ;
to housing diameter [mm]: 49.91 mm ;
for bearing clearance from [mm]: 0.03 mm ;
to bearing clearance [mm]: 0.086 mm ;
Oversize [mm]: 0.25 mm ;
Width from [mm]: 19.85 mm ;
Width to [mm]: 20.1 mm ;
ArticleState: Article to be discontinued ;
General Information: Mahle 014 PS 20662 025

Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
General Information: Glyco 01-4148/4 0.25MM